PLEXTOR

PX-12CSI, PX-12TSI

Device Type                 CD-ROM
Interface                   SCSI
Size                        5.25 in. half height
Spin Rate                   12X
Formats Supported           CD-ROM Mode 1, CD-DA, CD-I, CD-XA (Mode 2,
                            Form 1, Form 2), Video CD, Photo CD, CD Plus,
                            CD-G, Karaoke
View                        Top


                                CONNECTIONS

          Function             Label           Function             Label

  Audio out                    CN1

                              DRIVE SELECT ID

   Drive ID        JP1/jumper 1       JP1/jumper 2        JP1/jumper 3

         0             Open               Open                Open

         1            Closed              Open                Open

         2             Open              Closed               Open

  »      3            Closed             Closed               Open

         4             Open               Open               Closed

         5            Closed              Open               Closed

         6             Open              Closed              Closed

         7            Closed             Closed              Closed

                        USER CONFIGURABLE SETTINGS

                 Setting                       Label          Position

  »   Parity check enabled                 JP1/jumper 4        Closed

      Parity check disabled                JP1/jumper 4         Open

  »   SCSI termination enabled             JP1/jumper 5        Closed

      SCSI termination disabled            JP1/jumper 5         Open

  »   Factory configured - do not alter    JP1/jumper 6         Open

  »   Block mode disabled                  JP1/jumper 7         Open

      Block mode enabled                   JP1/jumper 7        Closed

  »   Eject mode disabled                  JP1/jumper 8         Open

      Eject mode enabled                   JP1/jumper 8        Closed

            Note:Block mode enables the CD-ROM as a boot drive when
            working in a UNIX environment.

            When Eject mode is enabled, a disc can not be ejected with
            the eject button. Software must be used in order to eject the
            disc.